The Resa Flip Series Tips and Tricks

Compatible with cold beverages and iced carbonated beverages.

When using with carbonated beverages on an airplane or at high altitudes, pressure will build up inside and may escape through the straw when opening it. To alleviate pressure and prevent this from happening, slowly slide back your SlideSeal™ lid to release pressure.

To open: push the slider back while the magnets take hold and expose the straw.

To close: push the slider forward to move the straw down and cover it for a 100% leakproof seal.

Every single piece is removable, making this the most hygienic straw tumbler there is. All Resa Flip lids, straws, and interior components are top-rack dishwasher safe.

Most Resa Flip bodies are top-rack dishwasher safe, with a few exceptions. Check the bottom of the sleeve on your tumbler for washing instructions.

When washing your lids, remove the SlideSeal™ slider by pushing back further from the open position until it disconnects from the lid. With the SoftSip™ straw, ensure the nub on the straw assembly is facing you. Tilt the SoftSip™ straw piece to the left to disconnect it from the lid (for deep cleaning, pull the silicone straw piece off, as well). Turn the lid over and remove the ColdKey™ stainless steel straw by twisting with the tabs until the notch aligns with the vertical grooves; pull down to release the straw. For deep cleaning, the gaskets under the SoftSip™ straw piece and the cold key straw, as well as the sleeve, can also be removed.